Bluetooth connection with TomTom 510 / 910 GPS

Many thanks to GrayPenguin @ BlackBerry Forums

This was written using the 8100 but one can assume it will work with others

Connecting the Pearl to a TomTom 510/910

The TomTom is an awesome device. The Pearl is an awesome device. Combined, it is navigation at its best. This FAQ will guide you in connecting a Pearl to a TomTom 510/910 to use hands-free calling and TomTom PLUS features. There are a few prerequisites. First, your Pearl must be using the 4.2.1 OS. It will not let the TomTom use the PLUS features without this upgrade. Also, the TomTom can use a good amount of data, so I would strongly recommend that you have an unlimited data plan. Alright, on to the good stuff.

  • Setting up hands-free calling:

1. On your TomTom device, select Mobile Phone from the menu.

2. When prompted to establish a connection between your TomTom and your phone, press Yes.

3. You now need to make you Blackberry discoverable in Bluetooth mode. To do this go to Options->Bluetooth then press the menu button and go to Options. Then scroll down to Discoverable and change this to Yes. Then press the menu button and select Save.

4. Select Yes when prompted to search for phones on your TomTom.

5. After a few moments a message should appear on your TomTom saying “PLEASE CONFIRM: Connect to Blackberry 8100?” Select Yes

6. When your Pearl asks for a passkey, input 0000

7. When your Pearl asks is you want to connect to the TomTom, check do not ask this again, and then select Yes.

8. You should now get a message on your TomTom saying that your Blackberry is ready for hands-free calling.

9. Select OK at the next few menus until you reach the one entitled TomTom PLUS. Select Yes If you would like to configure your TomTom for PLUS services.

    • Setting up PLUS services:

10. Since the Blackberry isn’t officially supported, select Other in the bottom right.

11. Then select your country. For me that is United States.

12. Then select your wireless provider. For me that is Cingular.

13. If it does not connect automatically, then you will need to manually set it up.

      • Setting connection settings manually:

14. The first thing to do is find the APN settings for your provider. These can be found by clicking here

a) Cingular happens to have two, so I will use the one I normally use which is

 APN: wap.cingular
 
 User Name: [email address]
 
 Pass: CINGULAR1

15. After having entered that information, you will be prompted about obtaining your IP address automatically. If no IP was specified on the APN page, then select Automatic. Else, select Manual and enter it there.

16.The same applies for the DNS server address.

17.The next input page says Dial. Here, enter *99#

18. At the Login Script page, enter the appropriate login script for your service provider. For Cingular, it is:

 at+cgdcont=1,"IP","isp.cingular"

a) A short list of them can be found Modem strings listed under # 8 of this FAQ

19. If prompted to send some information to the TomTom server, press either Ok or Skip. It doesn’t have any effect on setting it up.

20. If it can’t connect, it could either be a problem with your service provider, or with the settings you entered. Make sure you have the APN settings correct, and make sure they are also correct on your Blackberry.
Congratulations, your Blackberry and TomTom should now be the best of friends and you should be able to access all those cool PLUS services and make hands-free calls.

Reports

  • BB Pearl 4.2.0.73 on Cingular + tomtom go 910 6.525 not working. —Ikishk 13:38, 25 May 2007 (CDT)
  • BB Pearl 4.2.1.94 on Cingular + tomtom go 910 6.525 not working. —Ikishk 19:09, 26 May 2007 (CDT)
  • BB Pearl 4.2.1.96 on Cingular + tomtom go 910 6.525 not working. —Ikishk 21:03, 22 June 2007 (CDT)
  • BB Pearl 4.2.1.101 on Cingular + tomtom go 910 6.525 not working. —Ikishk 22:09, 23 July 2007 (CDT)
  • BB Pearl 4.2.1.103 on Cingular + tomtom go 910 7.162 not working. —Ikishk 14:12, 2 January 2008 (CST)
  • BB Pearl 4.2.0.64 on T-mobile + TomTom Rider not working 21 MAY 2007

Due to RIM firmware restrictions, the only working version is 4.2.1.66. Apparently that version didnt have the restriction. refer to the Blackberry Forums for more info. —Ikishk 01:45, 13 September 2007 (CDT)

2 Pcs Thermocouple Thermometer Digital K Type HVAC Dual Channels Digital Thermom picture

2 Pcs Thermocouple Thermometer Digital K Type HVAC Dual Channels Digital Thermom

$53.69



World War 2 Airplane Temperature Indicator Thermocouple AS 413 Type II  Tso-c43 picture

World War 2 Airplane Temperature Indicator Thermocouple AS 413 Type II Tso-c43

$149.99



Digital Type K Thermocouple Thermometer HVAC Temperature Clamp Meter, -328°F~250 picture

Digital Type K Thermocouple Thermometer HVAC Temperature Clamp Meter, -328°F~250

$46.73



WWII Era U.S. Navy Wheeco Engine Cylinder Thermometer Tester FSSC-88T-880-100 picture

WWII Era U.S. Navy Wheeco Engine Cylinder Thermometer Tester FSSC-88T-880-100

$249.99



Vintage cased comark 160c thermocouple meter picture

Vintage cased comark 160c thermocouple meter

$37.32



Travis Lopi 93006518 Gas Fireplace Thermocouple Black picture

Travis Lopi 93006518 Gas Fireplace Thermocouple Black

$14.76



Thermocouple Indicator Lead NAF 7273-10 88-L-800-10 Lewis BuAer SQ-106 10ft Navy picture

Thermocouple Indicator Lead NAF 7273-10 88-L-800-10 Lewis BuAer SQ-106 10ft Navy

$7.50



2M Temperature Measuring Line, K Type Temperature Sensing Line, Thermocouple ... picture

2M Temperature Measuring Line, K Type Temperature Sensing Line, Thermocouple ...

$17.18



Sper Scientific 800023 Type K Thermometer - Simultaneously display 4 channels picture

Sper Scientific 800023 Type K Thermometer - Simultaneously display 4 channels

$164.92



Husky Thermocouple 692744 picture

Husky Thermocouple 692744

$122.50



deneme bonus