On eBay Now...

Professional Drone Detector FPV Drone Approach Warning Device. TENETA-2 For Sale

Professional Drone Detector FPV Drone Approach Warning Device. TENETA-2
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Professional Drone Detector FPV Drone Approach Warning Device. TENETA-2:
$450.00

The Teneta UAV detector with two antennas (415-1050 MHz) is a spectrometer/carrier frequency range analyzer designed for early detection of the control signal and telemetry of FPV drones. The device has a 1.28-inch IPS touchscreen. It operates on a built-in Li-ion battery, the charge of which is enough for 7+ hours of operation.Equipped with external antennas with frequencies of 433 MHz, 915 MHz, 2.4 GHz (for the Pro version). On the right side there is a USB type-c charging connector and a piezo speaker output. On the left side there is a power switch.The detector can be connected to an Android device via a type-c – type-c cable. The "Teneta" software is used to view signal amplitudes (RSSI) at frequencies of 400-580 MHz and 720-1020 MHz. For the Pro version, the 2.4 GHz –2.485 GHz range is added.
Specifications
Scans the following carrier to work while chargingThe device's battery life is 7 h. 30 minTime to full charge - 1 h. 30 min (at 5V 1A)Screen: 1.28 inches IPS with a resolution of 240x240 pixelsBattery capacity (Li-ion) - 1300 mAhDevice weight 90 g with antennas, 80 g without antennasBody dimensions 80x24x97 mm
Technical featuresThe Teneta detector scans all ELRS (LoRa) signal transmitters: remote control, drone, ground stations, etc. Signal reception distance according to the results of tests from the military in real conditions: 100mW = 200m; 1W = from 500m.
Current settings for your Tenet device include:
Enable/disable sound signalsEnable/disable vibrationChange screen timeout and lock (never, 1, 5, 15, 30, 60min)Change display brightness (percentage)Threshold for changing the level of signal detection (by amplitude)Change in time to frequency (200, 300, 400, 500, 600, 700, 800, 900ms and 1s)Trigger threshold by the number of received packets (1, 2, 3, 4, 5)Enable/disable LoRa packet reception soundUpdating the subsystem and interface software


Buy Now

Popular

Recent Posts