
On eBay Now...
EEPROM for IGT S+ S-Plus Error 61-1 loop after RAM CLEAR For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

EEPROM for IGT S+ S-Plus Error 61-1 loop after RAM CLEAR:
$15.00
This sale is for the U1 EEPROM (which is located on the Motherboard, not the MPU board!). Sometimes doing a Ram Clear does not always work due to your U1 EEPROM being defective or is corrupted and will not clear the data stored in it. If you find that a Ram clear does not work for you and you are stuck in the dreaded “ERROR 61 loop” then it is most likely (not always) your EEPROM needs to be replace. Replacing this EEPROM requires the knowledge of de-soldering and soldering. Caution should always be taken! You will need to disconnect the wiring and remove the Motherboard! There are no instructions for this! Make sure to make note of what you disconnect and the notation of notch on the EEPROM. Install the new EEPROM with the notch in the same direction of your old one!CAUTION SHOULD ALWAYS BE TAKEN!
CAUTION:BE SURE TO INSTALL IN CORRECTLY. IF THE EEPROM IS INSTALLED BACKWARDS IT WILL BE DESTROYED and there will be no refunds!