Self-luminous large tritium lamp night light tube DIY 3*22.5MM For Sale
This item has been shown 67 times.
Self-luminous large tritium lamp night light tube DIY 3*22.5MM:
Self-luminous large tritium lamp night light tube DIY 3*22.5MM
Fluorine tube installation method: shadowless UV glue + purple light irradiation curing, first apply a small amount of shadowless UV glue to the bottom of the slot where the fluorine tube needs to be installed, and then put the tube into the product slot. If it is not right, use a toothpick to lighten it. Gently toggle the fluorine tube until the fluorine tube is in the desired position, and then apply a small amount of glue on the surface to protect the fluorine tube. Then wipe off the excess glue and irradiate it with a purple light for about 10 minutes to cure the glue. The irradiation time of the purple light is related to the amount of glue used. If you want to remove the fluorine tube after curing, you need to use a glue remover.
Shelf life: 120 days
On Oct-25-20 at 23:59:24 PDT, seller added the following information:
10pcs 25df321 At25df321-su Sop8
Gordon Brake Monitor
Opa2140 Precision Low-noise Rail-to-rail Out 11mhz Jfet Op Amp Opa2140aid
66 Pcs Schurter 4302.2001 Ac Power Entry Modules Screw-on 2-pole Integrated