STM32F103C8T6 ARM STM32 Minimum System Development Board Module - Multipack For Sale

STM32F103C8T6 ARM STM32 Minimum System Development Board Module - Multipack


This item has been shown 115 times.

Buy Now

STM32F103C8T6 ARM STM32 Minimum System Development Board Module - Multipack:
$7


STM32F103C8T6 ARM STM32 Minimum System Development Board Module - Multipack
product features: STM32F103C8T6 system board
Model: STM32F103C8T6
Product introduction
This is an ARM core board based on STM32F103C8T6 as the main chip, which has the following features:
  • 1. Onboard the MCU-based * basic circuit, such as crystal oscillator circuit, USB power management circuit and USB interface.
  • 2. The core board brings out all the I/O port resources.
  • 3, with SWD simulation debugging ** interface, the interface * less need 3 lines to complete the debugging ** task, compared to the traditional JTAG debugging has a lot of benefits, here to insert a sentence, JTAG is now largely eliminated Trends, such as ST's new M0 series MCU only retains the SWD debug interface, JTAG is directly canceled
  • 4, the size of the traditional DIP40 package (such as AT89S52) size, has not yet found a smaller core board of the same specification than ours.
  • 5, using the Mirco USB interface used in the current smart phone, easy to use, can do USB communication and power supply.
  • 6. For the STM32 RTC, we have adopted the officially recommended low-load RTC crystal scheme and used the Epson brand crystal oscillator without using a cheap cylindrical crystal.
  • 7. It is equipped with high-quality single-row pin headers with 1*40/2.54mm pitch to ensure excellent conductive contact, which is convenient for users to place the core board on the standard universal board or breadboard. The pin header is not soldered by default, and the user can select the welding direction according to his needs.
You can use Keil to compile, IAR to compile, and you can easily upgrade from 51 to ARM through J-Link or USART1** programs through our data and technical support.

Chip introduction:
  • 1, STM32F103C8T6
  • Package type: LQFP;
  • Number of pins: 48;
  • Inner core: Cortex-M3;
  • Working frequency: 72MHz;
  • Storage resources: 64K Byte Flash, 20KByte SRAM;
  • Interface resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I/O port,
  • Analog-to-digital conversion: 2x ADC (12-bit/16-channel)
  • Timer: 3 normal timers 1 advanced timer
  • Debug**: Supports debugging of JTAG/SWD interface**, supports IAP.
  • 2, RT9193: 3.3V regulator chip, * large output 300mA.
Interface introduction:
  • 1, SWD interface: support simulation, ** and debugging.
  • 2, Mirco USB interface: power supply and USB communication function, does not support **.
  • 3, USART1 interface: can be used for USART1 to carry out the program, or use USART1 for communication.
  • 4, MCU pin interface: draw all I / O port pins, easy to connect with peripherals.
  • 5, 5V and 3.3V power input and output interface: often used for external power supply, or co-processing with other modules
Other device introduction:
  • 1. Power LED (PWR): The power indicator status determines whether the power supply is stable.
  • 2. User LED (PC13): It is convenient for I/O output test or indicates the running status of the program.
  • 3. Start the jump selection programming mode: (1, user flash memory 2, SRAM 3, system memory).
  • 4. Reset button: used to reset the chip program by the user.
  • 5, 8M crystal oscillator: The system frequency can be set to 72MHz by multiplier setting.
  • 6, 32.768KHz crystal: for built-in RTC, or for calibration.

Shipping list:

  • 1, STM32F103C8T6 core board *1

  • 2, 1 * 20 2.54mm pitch pin * 2


    • We accept PayPal only.
    • Payment must be received within 3 Days from the date of purchase.
    • Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders.


    • We only ship to paypal confirmed address.
    • Item will be sent within 24 hours after payment received
    • We will ship all orders asap. from California via USPS or UPS.( No service on Weekend and public holidays).
    • Delivery time within the U.S. is usually just 3 to 5 business days, however in rare cases it could take 5 to 7 business days.
    • No combined shipping discount offered and no pick-up service.


    • If you have any questions you may reach us via message. Get In Touch
    • We warrant all products to be free from defects in material or workmanship for two month from date of purchase.
    • We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA(damage on arrival).
    • Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
    • Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
    • For malfunction products under warranty period, please contact our customer service via Message.


    • We always try to provide the most cost efficient products for customers, the most smooth payment and after-services, your response will help us make progress in many aspects.

    product features: STM32F103C8T6 system board
    Model: STM32F103C8T6
    Product introduction
    This is an ARM core board based on STM32F103C8T6 as the main chip, which has the following features:
    • 1. Onboard the MCU-based * basic circuit, such as crystal oscillator circuit, USB power management circuit and USB interface.
    • 2. The core board brings out all the I/O port resources.
    • 3, with SWD simulation debugging ** interface, the interface * less need 3 lines to complete the debugging ** task, compared to the traditional JTAG debugging has a lot of benefits, here to insert a sentence, JTAG is now largely eliminated Trends, such as ST's new M0 series MCU only retains the SWD debug interface, JTAG is directly canceled
    • 4, the size of the traditional DIP40 package (such as AT89S52) size, has not yet found a smaller core board of the same specification than ours.
    • 5, using the Mirco USB interface used in the current smart phone, easy to use, can do USB communication and power supply.
    • 6. For the STM32 RTC, we have adopted the officially recommended low-load RTC crystal scheme and used the Epson brand crystal oscillator without using a cheap cylindrical crystal.
    • 7. It is equipped with high-quality single-row pin headers with 1*40/2.54mm pitch to ensure excellent conductive contact, which is convenient for users to place the core board on the standard universal board or breadboard. The pin header is not soldered by default, and the user can select the welding direction according to his needs.
    You can use Keil to compile, IAR to compile, and you can easily upgrade from 51 to ARM through J-Link or USART1** programs through our data and technical support.

    Chip introduction:
    • 1, STM32F103C8T6
    • Package type: LQFP;
    • Number of pins: 48;
    • Inner core: Cortex-M3;
    • Working frequency: 72MHz;
    • Storage resources: 64K Byte Flash, 20KByte SRAM;
    • Interface resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I/O port,
    • Analog-to-digital conversion: 2x ADC (12-bit/16-channel)
    • Timer: 3 normal timers 1 advanced timer
    • Debug**: Supports debugging of JTAG/SWD interface**, supports IAP.
    • 2, RT9193: 3.3V regulator chip, * large output 300mA.
    Interface introduction:
    • 1, SWD interface: support simulation, ** and debugging.
    • 2, Mirco USB interface: power supply and USB communication function, does not support **.
    • 3, USART1 interface: can be used for USART1 to carry out the program, or use USART1 for communication.
    • 4, MCU pin interface: draw all I / O port pins, easy to connect with peripherals.
    • 5, 5V and 3.3V power input and output interface: often used for external power supply, or co-processing with other modules
    Other device introduction:
    • 1. Power LED (PWR): The power indicator status determines whether the power supply is stable.
    • 2. User LED (PC13): It is convenient for I/O output test or indicates the running status of the program.
    • 3. Start the jump selection programming mode: (1, user flash memory 2, SRAM 3, system memory).
    • 4. Reset button: used to reset the chip program by the user.
    • 5, 8M crystal oscillator: The system frequency can be set to 72MHz by multiplier setting.
    • 6, 32.768KHz crystal: for built-in RTC, or for calibration.

    Shipping list:

    • 1, STM32F103C8T6 core board *1

  • 2, 1 * 20 2.54mm pitch pin * 2

    PAYMENT
    • We accept PayPal only.
    • Payment must be received within 3 Days from the date of purchase.
    • Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders.


    SHIPPING
    • We only ship to paypal confirmed address.
    • Item will be sent within 24 hours after payment received
    • We will ship all orders asap. from California via USPS or UPS.( No service on Weekend and public holidays).
    • Delivery time within the U.S. is usually just 3 to 5 business days, however in rare cases it could take 5 to 7 business days.
    • No combined shipping discount offered and no pick-up service.


    Terms of Sale
    • If you have any questions you may reach us via message. Get In Touch
    • We warrant all products to be free from defects in material or workmanship for two month from date of purchase.
    • We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA(damage on arrival).
    • Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
    • Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
    • For malfunction products under warranty period, please contact our customer service via Message.


    ABOUT US
    • We always try to provide the most cost efficient products for customers, the most smooth payment and after-services, your response will help us make progress in many aspects.

    On May-05-19 at 01:27:14 PDT, seller added the following information:

    On May-22-19 at 03:52:36 PDT, seller added the following information:



    Buy Now

    Module Kit Usb Programmer Soic8 1.8v Adapter Useful Test Clip Flash For Eeprom picture
    Module Kit Usb Programmer Soic8 1.8v Adapter Useful Test Clip Flash For Eeprom


    Stm32f103c8t6 Minimum System Developmen Board Module Core Learning For Arduino picture
    Stm32f103c8t6 Minimum System Developmen Board Module Core Learning For Arduino


    Avr Programmer Adapter Integrated Circuits 10 Pin Module Cable Usb Usbasp Usbisp picture
    Avr Programmer Adapter Integrated Circuits 10 Pin Module Cable Usb Usbasp Usbisp


    Arduino Mini Usb Stm32f103rcbt6 Arm Cortex-m3 Leaflabs Leaf Maple Board Module picture
    Arduino Mini Usb Stm32f103rcbt6 Arm Cortex-m3 Leaflabs Leaf Maple Board Module