On eBay Now...

IGT S+ S-Plus Slot machine RAM & BV Bill Validator clear set chips & EEPROM For Sale

IGT S+ S-Plus Slot machine RAM & BV Bill Validator clear set chips & EEPROM


Buy Now

IGT S+ S-Plus Slot machine RAM & BV Bill Validator clear set chips & EEPROM:
$22.99

!!!!!!!!!!!!!!CHECK MY response!!!!!!!!!!!!!!


IGT S-PLUS CPU CLEAR AND BV SET UP CHIPS with instructions. (CODE-61?),(CODE-43, REELSTURNINGSLOW -WONT RESET, DEAD/REPLACED BATTERY ON CPU BOARD) If youownanIGT S-plus slot machine, you definitely need a set of these chips (in case you need to clear the ram-or at least restart the billacceptor.) Also, there good to just have around (in case and you will some day have to replace your CPU battery) to clear your CPU to factory settings. The BV (Bill Validator or bill acceptor) chip is needed if you have one. These two microchips workon S-PLUS machines:slant/upright(double diamond, red white blue, haywire, 5X payetc that require a clear chip when you get error codes that you can not clear with the reset key or when you change the battery)-if you own anIGT S-PLUS-you needthese chips.Easy to use:insertchip in the game chipsocket of cpu,power the machine on and push menu button. SIMPLY follow the INSTRUCTIONS -INCLUDED WITH CHIPS.Works on IGTS-PLUS, new/old style boards (10Mhz & 16Mhz), regardless of which style yourusing -(upright, slant, roundtop.)-NOTE: The BV chip will not upgradebill validator to accept new currency. -(chip must be replacedinvalidator head). You will receive a IVC123 clear chip and a SET15 BV chip in a STATIC and CRUSH proof container. Please make sure these are the chips you need for your machine. With these chips there is no need to change your jumper settings like some other ones for sale! Also, check my other sales if you have a SP1160 eprom chip before ordering!

Also included in this sale is the U1 EEPROM (which islocated on the Motherboard, not the MPU board!). Sometimesdoing a Ram Clear does not always work due to your U1 EEPROM being defective or is corrupted and will not clear the data stored in it.If you find that a Ram clear does not work for you and you are stuck inthe dreaded “ERROR 61 loop” then it is most likely (not always) your EEPROMneeds to be replace. Replacing thisEEPROM requires the knowledge of de-soldering and soldering. Caution should always be taken! You will need to disconnect the wiring and removethe Motherboard! There are no instructionsfor this! Make sure to make note of whatyou disconnect and the notation of notch on the EEPROM. Install the new EEPROM with the notch in thesame direction of your old one! CAUTION SHOULD ALWAYS BETAKEN!


!!!!!!!!!!!!!!CHECK MY response!!!!!!!!!!!!!!

STEP BY STEP Simple to follow INSTRUCTIONS INCLUDED.

NOTE: care must be used when handling thesesensitive chips. If the Chips are installed backwards they will be destroyed!

If your not sure if you have an S+ MPU board look at the one in the photos.

Your MPU board must look like the one in the photos!

MPU & Mother BOARDs NOT INCLUDED-SHOWN HERE JUST FOR REFERENCE!!!!


Check out my response!!!!


Please email me with any questions

Sorry-No combined shipping with this item...



Buy Now