Battery Tester Monitor Voltage Current Impedance Capacity Watt Energy Time Meter For Sale
This item has been shown 560 times.
Battery Tester Monitor Voltage Current Impedance Capacity Watt Energy Time Meter:
This meter is mainly used to test all kinds of battery’s voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time, and display the measurement data through LCD screen.
PZ-015: Measuring Range 300A (use external shunt, can matched with 50A, 100A, 200A, 300A four kinds of shunt).
Voltage Measuring range: 0-200V. (when the test voltage is ＜8V, please use the independent power supply mode)
Voltage Minimum resolution:0.01V.
Voltage The starting test voltage: 0.05V
Voltage Measurement accuracy:1%
Current Measuring range: 0-300A(Type: PZ-015) can set 50A, 100A, 200A,300A four range depend on the external shunt, the factory
default is 100A.
Current Minimum resolution: 1mA
Current The starting test current: 10mA
Current Measurement accuracy:1%
Power Measuring range: 0-60000W
Power Minimum resolution: 0.01W
Power The starting test power: 0.2W
Power Measurement accuracy:1%
Impedance = Voltage/ Current
Impedance Measuring range: 0-1000Ω (When over the test range or the current is zero, it display “---”)
Impedance Minimum resolution: 0.1Ω
Impedance Measurement accuracy:1%
Internal resistance= (Full voltage – Bring load voltage) / Bring load current, when the bring load voltage is larger than the
maximum voltage, the internal resistance is zero.
Internal Resistance Measuring range: 0-999mΩ (Display format: 999mΩ, when over the test range or the current is zero, it display “---”.)
Internal Resistance Minimum resolution: 1mΩ
Internal Resistance Measurement accuracy:1%
(Note:Note: Before you test the internal resistance, you should preset the full voltage depend on the battery type, after it is fully charged you
can use it to test; if you do not fully charge it, you can set the battery without load voltage is the full voltage, then test; the internal
resistance is not a fixed value, the more the battery discharged, the bigger the resistance.)
Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.
Dump energy is calculated via the current battery voltage value, before test you should preset the full voltage and the cut-off voltage
depend on the battery type; every grid voltage = (the highest voltage – the lowest voltage) / 10.
Accumulate energy consumption
Measuring range: 0～9999kWh (Over the test range will become zero.)
Minimum resolution: 1Wh
(Note: 1Wh=0.001kWh=0.001 Kilowatt)
Running time Measuring range: 0 ~ 999 hour (without load the time will not accumulate)
Display format: 0:00:00 ~ 999:59:59 (Over the test range will become zero.)
This meter has two modes: normal display mode and dormant mode. In normal display mode, short press the button to enter the
dormant mode, in order to reduce the whole machine power consumption, the backlight and LCD display will be turned off in dormant
mode. In dormant mode, short press the button will switch to the normal display mode.
Note: The meter will stop all measurement functions in dormant mode, so please do not switch to dormant mode if normal
measurement is performed.
Normal working state: 0.03-1.2 W
Sleeping state: 0.5mW-0.5W
(The power consumption is related to the test voltage value, the higher the voltage,the greater the power)
-20C ~ +60C.
If you need detailed instructions, please contact us to send PDF version.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Please allow 1-3mm slight deviation due to manual measurement. Thank you!
1 Set DC Multimeter 0-200V 0-300A Battery Tester Monitor
1 * Shunt
Digital Capacitance Meter, Yf-150
Ntron On Site N-10 Nitrogen Generator Analyzer With 60 Gal Tank
Hp 4329a High-resistance Meter S/n:2510j08244 For Parts/repair T5-b11
Panel Socket Led Display Voltage Meter Battery Gauge Car Voltmeter Motorcycle