This item has been shown 31 times.
Devices Included In This Data Sheet:Other PIC16(L)F193X Devices Available:High-Performance RISC CPU:• Only 49 Instructions to Learn:- All single-cycle instructions except branches• Operating Speed:- DC – 32 MHz oscillator/clock input- DC – 125 ns instruction cycle• Up to 16K x 14 Words of Flash Program Memory• Up to 1024 Bytes of Data Memory (RAM)• Interrupt Capability with Automatic ContextSaving• 16-Level Deep Hardware Stack• Direct, Indirect and Relative Addressing modes• Processor Read Access to Program Memory• Pinout Compatible to other 28/40/44-pinPIC16CXXX and PIC16FXXX MicrocontrollersSpecial Microcontroller Features:• Precision Internal Oscillator:- Factory calibrated to ±1%, typical- Software selectable frequency range from32 MHz to 31 kHz• Power-Saving Sleep mode• Power-on Reset (POR)• Power-up Timer (PWRT) and Oscillator Start-upTimer (OST)• Brown-out Reset (BOR)- Selectable between two trip points- Disable in Sleep option• Multiplexed Master Clear with Pull-up/Input Pin• Programmable Code Protection• High Endurance Flash/EEPROM cell:- 100,000 write Flash endurance- 1,000,000 write EEPROM endurance- Flash/Data EEPROM retention: > 40 years• Wide Operating Voltage Range:- 1.8V-5.5V (PIC16F193X)- 1.8V-3.6V (PIC16LF193X)PIC16LF193X Low-Power Features:• Standby Current:- 60 nA @ 1.8V, typical• Operating Current:- 7.0A @ 32 kHz, 1.8V, typical (PIC16LF193X)- 150A @ 1 MHz, 1.8V, typical (PIC16LF193X)• Timer1 Oscillator Current:- 600 nA @ 32 kHz, 1.8V, typical• Low-Power Watchdog Timer Current:- 500 nA @ 1.8V, typical (PIC16LF193X)Peripheral Features:• Up to 35 I/O Pins and 1 Input-only Pin:- High-current source/sink for direct LED drive- Individually programmable interrupt-on-pinchange pins- Individually programmable weak pull-ups• Integrated LCD Controller:- Up to 96 segments- Variable clock input- Contrast control- Internal voltage reference selections• Capacitive Sensing module (mTouchTM)- Up to 16 selectable channels• A/D Converter:- 10-bit resolution and up to 14 channels- Selectable 1.024/2.048/4.096V voltagereference• Timer0: 8-Bit Timer/Counter with 8-BitProgrammable Prescaler• Enhanced Timer1- Dedicated low-power 32 kHz oscillator driver- 16-bit timer/counter with prescaler- External Gate Input mode with toggle andsingle shot modes- Interrupt-on-gate completion• Timer2, 4, 6: 8-Bit Timer/Counter with 8-Bit PeriodRegister, Prescaler and Postscaler• Two Capture, Compare, PWM modules (CCP)- 16-bit Capture, max. resolution 125 ns- 16-bit Compare, max. resolution 125 ns- 10-bit PWM, max. frequency 31.25 kHz• Three Enhanced Capture, Compare, PWMmodules (ECCP)- 3 PWM time-base options- Auto-shutdown and auto-restart- PWM steering- Programmable dead-band delay• PIC16F1934 • PIC16LF1934• PIC16F1936 • PIC16LF1936• PIC16F1937 • PIC16LF1937• PIC16(L)F1933 (DS41575)• PIC16(L)F1938/9 (DS41574)Note: PIC16(L)F193X devices referred to in thisdata sheet apply to PIC16(L)F1934/6/7.28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers withLCD Driver with nanoWatt XLP 4 2008-2011 Microchip Technology Inc.Peripheral Features (Continued):• Master Synchronous Serial Port (MSSP) with SPIand I2CTM with:- 7-bit address masking- SMBus/PMBusTM compatibility- Auto-wake-up on start• Enhanced Universal Synchronous AsynchronousReceiver Transmitter (EUSART)- RS-232, RS-485 and LIN compatible- Auto-Baud Detect• SR Latch (555 Timer):- Multiple Set/Reset input options- Emulates 555 Timer applications• 2 Comparators:- Rail-to-rail inputs/outputs- Power mode control- Software enable hysteresis• Voltage Reference module:- Fixed Voltage Reference (FVR) with 1.024V,2.048V and 4.096V output levels- 5-bit rail-to-rail resistive DAC with po
[About us - PCB manufacturing]
DIYGSM.com and GoJGo.com are leading PCB manufacturer and electronic components supplier from China.
We have more than 10 years PCB manufacturing experience, provide you best quality and competitiveprice PCB with high quality service.
You can calculate PCB price, place order and manage your order by visit our web site:
Please do not hesitate to contact Mr. Ted Chen if you require further information.
Thanks and best regards,
Flexiable PCB, Aluminum PCB, Rigid PCB, SMD-Stencil manufacturing, PCB layout service; CNC machining
Instant Online PCB Quote
Special PCB price:
5 pcs 50x50 mm Double sided prototype PCB+free shipping,total: $9
5 pcs 50x50 mm 4 layers prototype PCB+free shipping, total: $26
1pc 300x400mm laser cut stencil: $17