
On eBay Now...
12 TUBE CHISEL PASTE EPIROC HYDRAULIC HAMMER HOE RAM GREASE 3363 0949 13 BREAKR For Sale

This item has been shown 298 times.

12 TUBE CHISEL PASTE EPIROC HYDRAULIC HAMMER HOE RAM GREASE 3363 0949 13 BREAKR:
$200
Up for sale is 12 (twelve) 14 OZ tubes of Epiroc chisel paste, used in hydraulic hammers, hoe rams, & breakers. 14 OZ tube for use in a grease gun. Take a close look at the pictures before you buy!
Standard chisel paste
Standard greases (i.e, those used on excavator
bearings) are not designed for the high temperatures that result from
the friction between the working tool, bushings and retainer bars when
the hydraulic breaker is in operation. They liquefy and disappear.
Without greasing, the parts involved in the friction will suffer from
accelerated wear.
Chisel Paste is a mineral-oil-based paste containing an aluminium
content soap and solid lubricants (such as graphite and copper) with
excellent release effect and ambient working temperature range from
-20°C to 1100°C/(-4°F to 2012°F), suitable for applications both in cold
weather and in high temperatures. High metal content acts ball bearing
to minimize high-temperature friction between the surfaces in contact,
resulting in less wear between the chisel, retainer bars and bushings.
As a result, Epiroc Chisel Paste reduces the cost of operation by
extending the lifetime of the wear parts and reducing the risk of
working tool fractures.
Features:
Benefits:
Excellent EP (Extreme Pressure) properties and good release effect
The solids content (especially the metal content) acts
as a ball bearing, resulting in considerably less wear on the bushings
and working tools.
Temperature range from -20°C to +1100°C / -4°F to +2012°F
You can work with your breaker for long, continuous
periods, even in warmer climates, with the chisel paste keeping its
protective properties.
Age-resistant composition
No need to replace grease cartridges after long idle
periods of the breaker. Chisel Paste keeps its protective properties,
even when the breaker is used only item will ship via UPS Ground shipping.Do your research to make sure this item will work for you.

Genuine Draper 1785mm X 1/2" X 6 Skip Bandsaw Blade 25768

Lot 10 Machinist Tools Center Drill Hss Keo 6" X 1,2,3,4,5, 10 Pieces Pre Owned

Vintage Chiseles

Bosch Hammer Steel Bull Point 3/4" Hex X 18" Hs1516